A good fish locator can make all the difference when you're on the water. Instead of drifting and hoping for the best, these marvelous little devices allow you see beneath your boat using sonar technology. Humminbird fish finders are some of the most popular brands on the market. These affordable, lightweight devices can really make a difference in the number and size of the fish you catch. In this article, we'll look at how the Humminbird can work for you.
Some models of Humminbird fishfinders are small enough and light enough to be used in small watercraft like speedboats canoes, and even inflatable boats. The key to the effectiveness of a fish finder sonar device is the transducer housing. This is what emits the sonar signal in a cone shape and transmits the information back to the screen where you can see it. By bouncing a sonar signal, you'll be able to see fish, weeds and underwater structures.
The smaller Humminbird models have transducers attached to a suction cup that will adhere to any material. This fish finder uses a dual beam sonar. One beam is a 60 degree beam to find the fish and the other is a 20 degree beam to accurately display the bottom and structure.
Getting Humminbird fish finders ready to hit the water is as simple as drilling a few holes and connecting a few cables. Start by mounting your Humminbird device in a location that is easily accessible. Next, connect the electrical leads from the unit to the relay box of your boat. You must connect the power to a hot wire and the ground to your ground plate.
Alternately, you can connect the leads directly to the battery. Finally, secure the transducer to the bottom of the boat. This is normally done at the rear of the boat in an unobstructed spot. To prevent leakage from the drill holes, seal the transducer with silicone. All you have to do then is route the cable from the transducer to the input of the view screen.
Operating Humminbird fishfinders is as easy as pushing a button. After turning on the device, digital readings will appear on the screen. Depending on which model Humminbird you have, these could represent depth, water temperature and boat speed. The line across the bottom of the screen represents the floor of the lake, river or reservoir. The undulations on the screen mirror the terrain on the bottom. A thick, dark line represents a hard bottom, while a thin, light line indicates a soft bottom. Fish will appear as arches or fish icons.
Humminbird fish finders are very easy to use but you can refer to the manual if you do encounter any difficulties. You can also refer to the company's web site for technical support. This is also a good way to stay informed of all software updates for your product, keep track of warranty expiration dates, and find out about recalls. The site also immediately addresses common problems. Often, resetting the unit to its default programming will correct problems.
Humminbird fish finding devices are great, reliable products that you can count on. With a Humminbird, anglers will always have a leg up on those elusive fish.
Showing posts with label fish finder. Show all posts
Showing posts with label fish finder. Show all posts
Tuesday, January 11, 2011
Friday, January 7, 2011
How Eagle Fish Finders Work
Fish finders aren't just for big commercial fishing boats anymore. Anglers everywhere can use these sonar devices to take the guesswork out of finding great fishing spots. Regardless of your environment, a locating device is a helpful piece of equipment to include with your fishing gear. Eagle fish finders have snagged a great reputation among sport fishermen because of device design and accuracy. It's ideal for small boats and is affordable. In this article, we'll weigh the pros and cons of the Eagle and help you decide if it's the right fish finder for you.
Eagle fish locators come in a variety of models, all of which are very easy to use and are reasonably priced. The design of the units is ideal for small boats, kayaks, canoes and even floating tubes. As with all electronic fish finders, the transducer is the working element. The Eagle's transducer has a suction cup mount that easily attaches to your boat. One of the most popular features is the large, bright screen that makes it easy to read the charts. The various models range in price from approximately $100-$500 and come with a 1-year manufacturer's warranty.
Essentially, fish locators are your eyes in the water. Like other brands, such as Garmin and Humminbird fishfinders, the Eagle fish finders work by sending a sonar signal into the water beneath your boat. The transducer emits the sonar signal in a coned shape that detects fish, weeds and underwater structures. The signal bounces back or 'echoes' to the boat and is read on the screen as a chart with easy to read symbols. With its 20 degree cone angle transducer mounting, the Eagle offers up to 60 degrees of fish detection and also has a high sensitivity setting to allow you to locate more fish.
One of the most attractive features of the Eagle finders is the simple operating mechanism. Anyone can use it. Once you find a fishing spot that you think might be a winner, turn on your device and evaluate the depth and water temperature. The information will be accurate to approximately 600 feet and will appear in the corner of the screen. The sonar chart will scroll and display what's directly beneath the boat as you drift or troll. By using the menu options you can adjust the sensitivity of the device. The fish will show as a straight line when you are stationary.
Eagle fish finders are known for their accuracy up to 600 feet, but sometimes branches and other debris can result in a false reading. To get the most out of your fish locator, you must determine which frequency to use. Generally, it's best to use 83 kHz option in very deep saltwater and the 200 kHz option in shallow water up to about 300 feet. The 200 kHz frequency gives better detail and definition, but its depth penetration isn't as good.
Fish locators are great tools but no piece of technology is a substitute for instinct. If you feel that your trophy catch is hiding in a certain spot, go ahead and hit it with everything you've got! As every avid angler knows, there's nothing like the thrill of a great catch.
Eagle fish locators come in a variety of models, all of which are very easy to use and are reasonably priced. The design of the units is ideal for small boats, kayaks, canoes and even floating tubes. As with all electronic fish finders, the transducer is the working element. The Eagle's transducer has a suction cup mount that easily attaches to your boat. One of the most popular features is the large, bright screen that makes it easy to read the charts. The various models range in price from approximately $100-$500 and come with a 1-year manufacturer's warranty.
Essentially, fish locators are your eyes in the water. Like other brands, such as Garmin and Humminbird fishfinders, the Eagle fish finders work by sending a sonar signal into the water beneath your boat. The transducer emits the sonar signal in a coned shape that detects fish, weeds and underwater structures. The signal bounces back or 'echoes' to the boat and is read on the screen as a chart with easy to read symbols. With its 20 degree cone angle transducer mounting, the Eagle offers up to 60 degrees of fish detection and also has a high sensitivity setting to allow you to locate more fish.
One of the most attractive features of the Eagle finders is the simple operating mechanism. Anyone can use it. Once you find a fishing spot that you think might be a winner, turn on your device and evaluate the depth and water temperature. The information will be accurate to approximately 600 feet and will appear in the corner of the screen. The sonar chart will scroll and display what's directly beneath the boat as you drift or troll. By using the menu options you can adjust the sensitivity of the device. The fish will show as a straight line when you are stationary.
Eagle fish finders are known for their accuracy up to 600 feet, but sometimes branches and other debris can result in a false reading. To get the most out of your fish locator, you must determine which frequency to use. Generally, it's best to use 83 kHz option in very deep saltwater and the 200 kHz option in shallow water up to about 300 feet. The 200 kHz frequency gives better detail and definition, but its depth penetration isn't as good.
Fish locators are great tools but no piece of technology is a substitute for instinct. If you feel that your trophy catch is hiding in a certain spot, go ahead and hit it with everything you've got! As every avid angler knows, there's nothing like the thrill of a great catch.
Subscribe to:
Posts (Atom)